For those thinking about upgrading the pegs. The OEM ones are: – 85mm long – 45 mm wide – the pin is 10mm – the mounting bracket on the bike is 25mm inside, 35 mm outside Advertisements
I did some measurements out of curiosity. Measured from the rear “luggage bolt” the bike sits down 8,5 cms when sat upon. Measured from the pegs the the amount is 3,5 cms. I’m assuming the sag will increase when the suspension gets properly broken in. The suspension itself is completely stock. There is maybe about…
The bars are 22mm and the riser bolts are approximately 32mm apart. *I’m listing these little details for my own reference, but I quess someone else might find some use out of this stuff too.
Still don’t know what this bar should be called, but it’s the same diameter as the handle bars and it has about 50 mm straight width. *I’m listing these little details for my own reference, but I quess someone else might find some use out of this stuff too.