SW-Motech barback risers for Honda 250 Rally

IMG_4810
This is what the box contains
IMG_4830
Off with the old ones
IMG_4804
This is what the cables look like from the factory. (Minus the bird crap)

The SW-Motech barback risers came yesterday and I installed them on the same day.

As I suspected the stock cables were too short for the bars to be able to fit properly without some additional work.

The biggest problem was the brake cable. I don’t see any way to get any similar risers to work without freeing some cables first.

The brake cable is held in place with a metal bracket which I removed completely. ( it also has 2 electric cables attached to it) Once removed there was sufficient amount of slack and there is no binding at any steering position.

IMG_4831
This the bracket I removed
IMG_4839
Clutch cable unhooked
IMG_4842
The “after” shot of the cables
IMG_4843
As with any good installation, there were parts left over

I also freed the clutch cable from the metal hook to get more free play.

Once I got the bars lined up, I loosely zip tied the free cables to the beforementioned metal wire hook. This way they stay in check , but are also able to move freely enough.

IMG_4838

As a side effect there is now more room between the screen and the hand guards at full lock.

IMG_4848

IMG_4847
The end result
IMG_4836
Sw-Motech up & back barback risers on Honda CRF 250 Rally

The product itself seems to be discontinued, but they can still be found at Amazon and ebay.

Amazon link:SW-MOTECH handlebar barbacks for 7/8″ / 22mm diameter handlebars. 31mm up, 22mm back. Black powdercoating.

5 Comments Add yours

  1. Why did you decide to go with bar risers, rather than taller bars?
    I recently fitted a set of Renthal RC High bars to my Rally. They are the same bend as stock, but 22mm taller. The slight rise makes a nice difference when standing up etc, and the Renthal bars are stronger than the OEM item.

    Like

    1. 250rally says:

      I quess I took the easy way. Simpler and faster install than changing the bars.

      Like

      1. Patrick F. says:

        First of all, thanks again for all these informations you share. It saves us money and time! How do you like this SW MOTECH setup after using it offroad? I’m going to buy them if you tell me that it is fine, but I need to be sure because they are quite expensive

        Greetings from France

        Like

  2. John Philips says:

    Dropped my bike last week, wasn’t a heavy drop, it fell on medium sand, but bar is now slightly bent…. sigh. Renthal bars it is from now on, I don’t recommend even the raisers, just get a new bar.

    Like

  3. Patrick F. says:

    Hi, thanks a lot for your 2 posts about handlebar risers. I would have the done a mistake, buying “regular” risers…It enables me (and us) to save time and money!

    You don’t tell if you are happy about the SW MOTECH risers. Is it the case after a few miles offroad? Thanks a lot, greetings from France

    Like

Leave a Reply to 250rally Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s